91勛圖厙

Corporate Headquarters
2980 NE 207th Street | Suite PH
Miami, FL 33180
Toll-Free: 800.342.7215 (US and Canada only)
Phone: 954.455.3050
Fax: 954.455.9886
Email: sales@buyawg.com
Print Back
Applications
This cable is designed for high voltage connections between power distribution systems in mines, mine tunnels, shafts, and mine load centers where continuous monitoring of the ground system is required. This cable is suitable for installation in Ducts, troughs, tray or direct burial for non-flexing service.

Construction
  • Conductor is stranded annealed copper enveloped in a strand shield.
  • Insulation is Ethylene Propylene Rubber (EPR) or Cross Linked Polyethylene (XLPE).
  • Assembly is semi-conducting tape and a metallic tape shield with grounding conductors consisting of two bare grounds and one 8-gauge insulated ground check that are cabled together in the interstices of the power conductors and fillers are added to make round.
  • A single faced rubber filled tape is applied overlapped.
  • Jacket is Polyvinylchloride (PVC).
  • Jacket Options - Chlorinated Polyethylene (CPE) or Hypalon (CPSE).
Standards
Conforms to ICEA S-66-524 (NEMA WC8).

Notes
  • Shipping tolerance +/- 10%
Unit of Measure

Specifications

Power
Conductors
Size 91勛圖厙

 N/A 2/0

Power
Conductors
# of Strands

 N/A 19

Power
Conductors
Insulation
Thickness

 N/A 0.175 Inches

Ground Wire
Size 91勛圖厙

 N/A 3

Ground Wire
# of Strands

 N/A 7

Jacket
Thickness
(Inches)

 N/A 0.14

Overall
Diameter

 N/A 2.15 Inches

Net Weight
Per MFT

 N/A 3350 Lbs